Conveyor Belt Dryer Paddy Mesh Belt Dryer Vegetable Tunnel Drying Machine

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: WDH1.8x10-5
• Heating Mode: Transmission
• Material Status: Granule, Solution, Strap, Bulk
• Drying Medium: Inactive Gas, Superheated Steam
• Operation Pressure: Atmospheric Pressure
• Type: Impactor
• Transport Package: Customized
• Specification: customized
• Trademark: VOSTOSUN
• Origin: Shanghai, China
• HS Code: 8215990000
• Production Capacity: 50sets/Month

Product Description

Product Overview

Mesh Belt Dryer

 

Usage
WDH series mesh belt dryer is a drying equipment that can be continuously produced in industrial production, mainly drying flake, strip, block and granular materials. This series of dryers have the advantages of fast drying speed, high evaporation intensity, large output, and flexible adjustment of drying time.

Working Principle
The material is evenly spread on the mesh belt, and driven by the motor, the material on the mesh belt runs to the end of the other end and is turned into the lower layer. This reciprocating movement, until the discharge end sends out the drying box, completes the drying process.

Under the action of the fan, the hot air in the box transfers heat to the material through the mesh belt. After heating the air to the temperature required for drying, and then contacting the mesh belt material layer to complete the heat transfer process, the air temperature drops and the water content increases, part of the moist air is discharged by the induced draft fan, and the other part is connected to the supplementary normal temperature. After the air is mixed, the second drying cycle is carried out to achieve full utilization of energy.

The temperature in the box can be monitored by the thermocouple reaction line, and the air intake volume of the fan can be adjusted in time.

Structure Description

1. Transmission system

The system adopts a combined structure of motor + cycloidal planetary gear speed reducer + mesh belt drive for uniform motion. The running speed of the mesh belt can be achieved by adjusting the running frequency of the motor.

 

2. Transmission system

It consists of driving wheel, driven wheel, conveying chain, tensioning device, strut, mesh belt and rolling roller.The chains on both sides are connected into one through the shaft, and are positioned and moved at a constant speed through the sprocket, roller and track. The driving wheel is installed on the discharge side.

 

3. Drying room

The drying room is divided into two parts: the main drying room and the air duct. The main drying room is equipped with an observation door, and the bottom is a blanking inclined plate, and is equipped with a cleaning door, which can regularly clean the accumulated materials in the box.

 

4. Dehumidification system

After the hot air in each drying chamber completes heat transfer, the temperature drops, the air humidity increases, and the drying capacity decreases, and part of the exhaust gas needs to be discharged in time. After the exhaust gas is collected from each moisture exhaust port to the moisture exhaust main pipe, it is discharged to the outside in time by the negative pressure of

the induced draft fan of the moisture exhaust system.

 

5. Electric control cabinet

See the electrical control schematic diagram for details
Specification

Model	Area	Temperature	Fan Power (Adjustable)	Capacity	Power	Heating Method
WDH1.2×10-3	30m2	120-300ºC	5.5	0.5-1.5T/h	1.1×3	Dry Hot Air
WDH1.2×10-5	50m2	120-300ºC	7.5	1.2-2.5T/h	1.1×5	Dry Hot Air
WDH1.8×10-3	45m2	120-300ºC	7.5	1-2.5T/h	1.5×3	Dry Hot Air
WDH1.8×10-5	75m2	120-300ºC	11	2-4T/h	1.5×5	Dry Hot Air
WDH2.25×10-3	60m2	120-300ºC	11	3-5T/h	2.2×3	Dry Hot Air
WDH2.3×10-5	100m2	120-300ºC	15	4-8T/h	2.2×5	Dry Hot Air
The actual output needs to be calculated according to the specific gravity of the material

Application

Company Profile

AVP GROUP LIMITED (AVP for short) was founded in 2005, with its head office in Hongkong. Shanghai VOSTOSUN Industrial Co., Ltd ,was established in 2006, as one of the subsidiary companies of AVP, VOSTOSUN is mainly dedicated to designing and manufacturing drying equipment (Rotary drum dryer, single drum dryer, three-cylinder dryer, etc.), mineral beneficiation equipment (Ball mill, flotation machine, magnetic separator, thickener, mixer, etc.), crushing & grinding equipment(Jaw crusher, Impact crusher, Cone crusher, Mobile Crusher Plant, Raymond mill, Micro-powder Grinding Mill, etc.), gypsum powder & board plant,etc.
VOSTOSUN has well experienced technical team in our Technical Department and R&D Department with more than 30 technicians.We guarantee product quality based on mature processing technic. Since we have established long-lasting relationship with forging company and logistic company, we can assure you quality products and timely transportation.

FAQ
1.Which countries do you export to?
Asia: India, Philippines, Thailand, Burma, Vietnam, Bangladesh, Kazakhstan, Turkmenistan, etc.
Middle East: Saudi Arabia, UAE, Jordan, Oman, Pakistan, Qatar, etc.
Europe: Russia, Ukraine, Belarus, Bulgaria, etc.
Africa: South Africa, Kenya, Congo, Ethiopia, Nigeria, Ghana, Algeria, Senegal, Tunisia, etc.
South America: Brazil, Peru, Chile, Mexico, etc. Oceania: Papua New Guinea, Australia, etc.

2.What is the proportion of your products exported?
75% of our products are exported to all over the world.

3.What is the payment term?
Payment term is negotiable and there will be favorable payment terms for long-term customers. TT, L/C, D/P, depending on the cooperation time, country and contract value.

4.What kind of logistic service do you supply?
A:Transportation: railway transportation, international through transport, including (international railway through
transportation, Sea-rail intermodal through transportation, sea-land multimodal transportation. Means of transport :
Container, LCL, FRC, ro-ro, bulk cargo, train carriage, truck, air plane.

B:Term: FOB,CIF, DAP, to door service, etc.

5.Can you produce customizable machines?
Yes, we can provide customizable machines according to your requirements.

6. How about your After-sales service?
We have after-sale service, and can provide 24-hour technical support by phone and email. We also have local oversea warehouse in Uzbekistan.